Squeaking in Ceramic-on-Ceramic Hips: The Importance of Acetabular Component Orientation

References 

1. Boutin P. Total arthroplasty of the hip by fritted aluminum prosthesis. Experimental study and 1st clinical applications. Rev Chir Orthop Reparatrice Appar Mot. 1972;58:3
   • MEDLINE
2. Oonishi H, Clarke IC, Good V, et al. Alumina hip joints characterized by run-in wear and steady-state wear to 14 million cycles in hip-simulator model. J Biomed Mater Res A. 2004;70:4
3. Nevelos JE, Ingham E, Doyle C, et al. Wear of HIPed and non-HIPed alumina-alumina hip joints under standard and severe simulator testing conditions. Biomaterials. 2001;22:16
4. Hamadouche M, Boutin P, Daussange J, et al. Alumina-on-alumina total hip arthroplasty: a minimum 18.5-year follow-up study. J Bone Joint Surg Am. 2002;84-A:1
   • MEDLINE
5. Kavanagh BF, Wallrichs S, Dewitz M, et al. Charnley low-friction arthroplasty of the hip. Twenty-year results with cement. J Arthroplasty. 1994;9:3
   • Abstract
   • Full-Text PDF (492 KB)
   • CrossRef
6. Amstutz HC, Clarke IC. Evolution of hip arthroplasty. In:  Amstutz HC editors. Hip arthroplasty. New York: Churchill Livingstone; 1991;p. 1
7. Charnley J. Low friction arthroplasty of the hip. Berlin: Springer-Verlag; 1979;
8. Morlock M, Nassutt R, Janssen R, et al. Mismatched wear couple zirconium oxide and aluminum oxide in total hip arthroplasty. J Arthroplasty. 2001;16:8
   • Abstract
   • Full Text
   • Full-Text PDF (63 KB)
   • CrossRef
9. Back DL, Dalziel R, Young D, et al. Early results of primary Birmingham hip resurfacings. An independent prospective study of the first 230 hips. J Bone Joint Surg Br. 2005;87:3
   • CrossRef
10. Ackland MK, Bourne WB, Uhthoff HK. Anteversion of the acetabular cup. Measurement of angle after total hip replacement. J Bone Joint Surg Br. 1986;68:3
11. Murray DW. The definition and measurement of acetabular orientation. J Bone Joint Surg Br. 1993;75:2
    • MEDLINE
12. Walter WL, Insley GM, Walter WK, et al. Edge loading in third generation alumina ceramic-on-ceramic bearings: stripe wear. J Arthroplasty. 2004;19:4
13. Armitage P, Berry G, Matthews JNS. Statistical methods in medical research. 4th ed.. Oxford: Blackwell; 2002;
14. Digioia AM, Jaramaz B, Levison TJ, et al. Functional implant alignment following total hip replacement. A.A.O.S.,. SE014 ed.. 2005;Washington
15. McCollum DE, Gray WJ. Dislocation after total hip arthroplasty. Causes and prevention. Clin Orthop. 1990;261
16. Digioia AM, Jaramaz B, Plakseychuk AY, et al. Comparison of a mechanical acetabular alignment guide with computer placement of the socket. J Arthroplasty. 2002;17:3
    • Abstract
    • Full-Text PDF (45 KB)
    • CrossRef
17. Kennedy JG, Rogers WB, Soffe KE, et al. Effect of acetabular component orientation on recurrent dislocation, pelvic osteolysis, polyethylene wear, and component migration. J Arthroplasty. 1998;13:5
18. Schmalzried TP, Guttmann D, Grecula M, et al. The relationship between the design, position, and articular wear of acetabular components inserted without cement and the development of pelvic osteolysis. J Bone Joint Surg Am. 1994;76:5
19. Patil S, Bergula A, Chen PC, et al. Polyethylene wear and acetabular component orientation. J Bone Joint Surg Am. 2003;85-A(Suppl 4):56
    • MEDLINE
20. Lewinnek GE, Lewis JL, Tarr R, et al. Dislocations after total hip-replacement arthroplasties. J Bone Joint Surg Am. 1978;60:2