The Journal of Arthroplasty
Volume 25, Issue 3 , Pages 369-374 , April 2010

Clinical and Radiographic Results for the Richards Modular Hip System Prosthesis in Total Hip Arthroplasty: Average 10-Year Follow-Up

Received 24 February 2008 ,Accepted 21 December 2008.

References 

  1. Harris WH. Traumatic arthritis of the hip after dislocation and acetabular fractures: treatment by mold arthroplasty: an end-result study using a new method of result evaluation. J Bone Joint Surg Am. 1969;51:737
  2. Fukuhara S, Bito S, Green J, et al. Translation, adaptation, and validation of the SF-36 Health Survey for use in Japan. J Clin Epidemiol. 1998;51:1037
  3. Fukuhara S, Ware JE, Kosinski M, et al. Psychometric and clinical tests of validity of the Japanese SF-36 Health Survey. J Clin Epidemiol. 1998;51:1045
  4. Ozawa T, Shimizu K. Evaluation of patients' satisfaction after total hip arthroplasty (THA). J Phys Ther Sci. 2007;19:139
  5. Noble PC, Alexander JW, Lindahl LJ, et al. The anatomical basis of femoral component design. Clin Orthop. 1988;235:148
  6. Nakamura Y, Nakata Y, Akita M, et al. Original cementless femoral stem for dysplastic hip: clinical results of HPF stem. J Arthroplasty. 2007;22:553
  7. Gruen TA, McNeice GM, Amstutz HC. “Modes of failure” of cemented stem-type femoral components: a radiographic analysis of loosening. Clin Orthop. 1979;141:17
  8. Engh CA, Massin P, Suthers KE. Roentgenographic assessment of the biologic fixation of porous-surfaced femoral components. Clin Orthop. 1990;257:107
  9. Engh CA, Bobyn JD, Glassman AH. Porous-coated hip replacement. The factors governing bone ingrowth, stress shielding, and clinical results. J Bone Joint Surg Br. 1987;69:45
  10. Kubo T, Inoue S, Maeda T, et al. Cementless Lord total hip arthroplasty: cup loosening common after minimum 10-year follow-up of 103 hips. Acta Orthop Scand. 2001;72:585
  11. Dorr LD, Wan Z. Ten years of experience with porous acetabular components for revision surgery. Clin Orthop. 1995;319:191
  12. Kaplan EL, Meier P. Nonparametric estimation from incomplete observations. J Am Statist Assn. 1958;53:457
  13. Orishimo KF, Claus AM, Sychterz CJ, et al. Relationship between polyethylene wear and osteolysis in hips with a second-generation porous-coated cementless cup after seven years of follow-up. J Bone Joint Surg Am. 2003;85:1095
  14. Maloney WJ, Woolson ST. Increasing incidence of femoral osteolysis in association with uncemented Harris-Galante total hip arthroplasty. A follow-up report. J Arthroplasty. 1996;11:130
  15. Clohisy JC, Harris WH. The Harris-Galante uncemented femoral component in primary total hip replacement at 10 years. J Arthroplasty. 1999;14:915
  16. Dorr LD, Lewonowski K, Lucero M, et al. Failure mechanisms of anatomic porous replacement I cementless total hip replacement. Clin Orthop. 1997;334:157
  17. Lachiewicz PF, Soileau ES, Bryant P. Second-generation proximally coated titanium femoral component: minimum 7-year results. Clin Orthop. 2007;465:117
  18. Cameron HU, Keppler L, McTighe T. The role of modularity in primary total hip arthroplasty. J Arthroplasty. 2006;21:89
  19. Dorr LD, Wan Z. Comparative results of a distal modular sleeve, circumferential coating, and stiffness relief using the Anatomic Porous Replacement II. J Arthroplasty. 1996;11:419

 No benefits or funds were received in support of the study.

PII: S0883-5403(08)01004-8

doi: 10.1016/j.arth.2008.12.008

The Journal of Arthroplasty
Volume 25, Issue 3 , Pages 369-374 , April 2010