The Journal of Arthroplasty
Volume 24, Issue 8 , Pages 1210-1215 , December 2009

Use of Slide Presentation Software as a Tool to Measure Hip Arthroplasty Wear

  • Ho Hyun Yun, MD

      Affiliations

    • Department of Orthopaedic Surgery, Korea University School of Medicine, Seoul, South Korea
    • ,
  • Nirmal K. Jajodia, MS, DNB

      Affiliations

    • Department of Orthopaedic Surgery, Korea University School of Medicine, Seoul, South Korea
    • ,
  • Jae Sung Myung, MD

      Affiliations

    • Department of Radiology, Korea University School of Medicine, Seoul, South Korea
    • ,
  • Jong Keon Oh, MD, PhD

      Affiliations

    • Department of Orthopaedic Surgery, Korea University School of Medicine, Seoul, South Korea
    • ,
  • Sang Won Park, MD, PhD

      Affiliations

    • Department of Orthopaedic Surgery, Korea University School of Medicine, Seoul, South Korea
    • ,
  • Won Yong Shon, MD, PhD

      Affiliations

    • Department of Orthopaedic Surgery, Korea University School of Medicine, Seoul, South Korea
    • Corresponding Author InformationReprint requests: Won Yong Shon, MD, PhD, Department of Orthopaedic Surgery, Guro Hospital, Korea University School of Medicine, 80, Guro-Dong, Guro-Gu, Seoul 152703, South Korea.

Received 15 January 2009 ,Accepted 6 June 2009.

References 

  1. Howie DW. Tissue response in relation to type of wear particles around failed hip arthroplasties. J Arthroplasty. 1990;5:337
  2. Holt G, Murnaghan C, Reilly J, et al. The biology of aseptic osteolysis. Clin Orthop Relat Res. 2007;460:240
  3. Llinas A, Sarmiento A, Ebramzadeh E, et al. Mechanism of failure in hips with an uncemented, all polyethylene socket. Clin Orthop Relat Res. 1999;145
  4. Mirra JM, Marder RA, Amstutz HC. The pathology of failed total joint arthroplasty. Clin Orthop Relat Res. 1982;175
  5. Bragdon CR, Kwon YM, Geller JA, et al. Minimum 6-year follow-up of highly cross-linked polyethylene in THA. Clin Orthop Relat Res. 2007;465:122
  6. Glyn-Jones S, Isaac S, Hauptfleisch J, et al. Does highly cross-linked polyethylene wear less than conventional polyethylene in total hip arthroplasty? A double-blind, randomized, and controlled trial using roentgen stereophotogrammetric analysis. J Arthroplasty. 2008;23:337
  7. Mayman DJ, Anderson JA, Su EP, et al. Wear data and clinical results for a compression molded monoblock elliptical acetabular component: 5- to 9-year data. J Arthroplasty. 2007;22:130
  8. Miyanishi K, Hara T, Kaminomachi S, et al. Short-term wear of Japanese highly cross-linked polyethylene in cementless THA. Arch Orthop Trauma Surg. 2008;128:995
  9. Muratoglu OK, Bragdon CR, O'Connor DO, et al. A novel method of cross-linking ultra-high-molecular-weight polyethylene to improve wear, reduce oxidation, and retain mechanical properties. Recipient of the 1999 HAP Paul Award. J Arthroplasty. 2001;16:149
  10. Sharkey PF, Hozack WJ, Dorr LD, et al. The bearing surface in total hip arthroplasty: evolution or revolution. Instr Course Lect. 2000;49:41
  11. Charnley J, Halley DK. Rate of wear in total hip replacement. Clin Orthop Relat Res. 1975;170
  12. Dorr LD, Wan Z, Gruen T. Functional results in total hip replacement in patients 65 years and older. Clin Orthop Relat Res. 1997;143
  13. Livermore J, Ilstrup D, Morrey B. Effect of femoral head size on wear of the polyethylene acetabular component. J Bone Joint Surg Am. 1990;72:518
  14. Devane PA, Bourne RB, Rorabeck CH, et al. Measurement of polyethylene wear in metal-backed acetabular cups. I. Three-dimensional technique. Clin Orthop Relat Res. 1995;303
  15. Martell JM, Berdia S. Determination of polyethylene wear in total hip replacements with use of digital radiographs. J Bone Joint Surg Am. 1997;79:1635
  16. Barrack RL, Lavernia C, Szuszczewicz ES, et al. Radiographic wear measurements in a cementless metal-backed modular cobalt-chromium acetabular component. J Arthroplasty. 2001;16:820
  17. Ebramzadeh E, Sangiorgio SN, Lattuada F, et al. Accuracy of measurement of polyethylene wear with use of radiographs of total hip replacements. J Bone Joint Surg Am. 2003;85-A:2378
  18. Callaghan JJ, Salvati EA, Pellicci PM, et al. Results of revision for mechanical failure after cemented total hip replacement, 1979 to 1982. A two to five-year follow-up. J Bone Joint Surg Am. 1985;67:1074
  19. Jacobs CA, Christensen CP, Greenwald AS, et al. Clinical performance of highly cross-linked polyethylenes in total hip arthroplasty. J Bone Joint Surg Am. 2007;89:2779
  20. Ilchmann T. Radiographic assessment of cup migration and wear after hip replacement. Acta Orthop Scand Suppl. 1997;276:1
  21. Collier MB, Kraay MJ, Rimnac CM, et al. Evaluation of contemporary software methods used to quantify polyethylene wear after total hip arthroplasty. J Bone Joint Surg Am. 2003;85-A:2410

 No benefits or funds were received in support of this study.

 Level of evidence: Diagnostic study, level–II.

PII: S0883-5403(09)00230-7

doi: 10.1016/j.arth.2009.06.012

The Journal of Arthroplasty
Volume 24, Issue 8 , Pages 1210-1215 , December 2009

Article Tools

* Image Usage & Resolution